Build your in-office aligner lab
Explore a complete production workspace, then choose the equipment you need to start designing, printing, finishing, and packing aligners in your practice.
Loading interactive 3D lab…
Everything you need to get started
Work through the same five stations shown in the lab. Each section explains the production stage and collects its recommended equipment in one place.
Production
Turn print-ready files into accurate physical models, then wash and cure each build before it moves to forming.
Equipment
- Purchase
Form 4B 3D printer
Masked SLA printer with a 20 × 12.5 × 21 cm build volume.
- Purchase
Form Wash V2
Automated model washing with a 14.4 L solvent bucket.
- Purchase
Form Cure V2
405 nm light and controlled heat for consistent post-curing.
- Purchase
Baker's rack
Mobile tray storage for drying, staging, and work in progress.
Thermoforming
Heat and pressure-form aligner material over each printed model to create a precise shell with repeatable adaptation.
Trimming
Remove formed material from the model, establish the trim line, and smooth the primary edge for patient-ready geometry.
Equipment
- Purchase
Lab handpiece
Variable-speed 50,000 RPM micromotor for accurate trimming and finishing.
Quality Control
Inspect every aligner, refine any rough areas, verify the fit on its model, and keep approved trays organized by case.
Packing
Label, protect, and sequence finished aligners so each patient set is complete and ready for delivery or shipping.